Modern villa front with full-height aluminium windows

Aluminium Curtain Walls & Structural Glazing in Dubai

Large areas of glass that make a building feel open and modern. Alvisto designs, fabricates and installs aluminium curtain walls, structural glazing and glazed façades for villas, showrooms, offices and low- to mid-rise commercial buildings in Dubai, Sharjah and across the UAE.

What is a curtain wall?

A curtain wall is a non-load-bearing aluminium-and-glass façade hung on the outside of the building structure. It carries its own weight and wind loads back to the floor slabs or columns, so the glass can run across several floors without heavy walls. Curtain walls are used for double-height villa living rooms, staircases, showrooms and office façades.

Systems we install

  • Stick curtain wall – vertical mullions and horizontal transoms assembled on site, with glass fixed into the frame; flexible for villas and small to medium buildings.
  • Structural (silicone) glazing – glass bonded to the frame so that no aluminium caps show on the outside, giving a smooth all-glass look.
  • Semi-structural glazing – a mix of visible caps in one direction and flush joints in the other.
  • Glazed entrances and storefronts – integrated doors and lobbies; see also shopfronts.
  • Combined façades – glass combined with ACP cladding and aluminium louvres for shading.

Glass for UAE façades

A glazed façade in the UAE must control solar heat as well as bring in light. Typical specifications include double-glazed units with solar-control or low-E coatings, tinted or reflective glass on the sunniest elevations, and tempered or laminated glass where safety requires it. We select the glass together with you, and with your architect or consultant on larger projects, based on orientation, energy targets and appearance.

Thermal break and sealing

Thermal-break aluminium profiles reduce heat transfer through the frame, and carefully designed gaskets, drainage and silicone joints keep out wind-driven rain and dust. Learn more in our guide on thermal break aluminium in the UAE.

Approvals and coordination

Façade work usually needs approval drawings and, on commercial buildings, technical submittals for the consultant and authorities. We prepare shop drawings and coordinate with the main contractor, the structure and the other trades. Requirements depend on the building and the authority, so we review them for each project.

What affects the price

  1. Façade area and height above ground.
  2. System – stick, structural or semi-structural glazing.
  3. Glass specification – double glazing, coatings, laminated glass.
  4. Openings – integrated doors, vents and windows.
  5. Access – scaffolding, lifting equipment and working at height.

Our process

  1. Free site visit or drawing review – we look at the structure, openings and design intent.
  2. Design and quotation – system selection, glass specification and an itemised quote.
  3. Shop drawings and approvals – drawings and submittals where needed.
  4. Fabrication – aluminium profiles cut, machined and powder-coated; glass units ordered to size.
  5. Installation and handover – installation, sealing, water testing and handover.

Stick or unitised: two ways to build a curtain wall

MethodHow it is builtTypical use
Stick systemMullions and transoms are fixed on site, then glass is installedVillas, showrooms, low-rise buildings and smaller façades
Unitised systemComplete panels are assembled in the factory and lifted into placeLarger and taller buildings with repeating panels

Glass choices

The glass decides much of how the building looks and how hot it gets inside. Options include double-glazed units with solar-control or low-E coatings, tinted or reflective glass, laminated glass for safety, and spandrel panels to hide slab edges. The right specification depends on orientation, building use and the approvals required, and we help you compare samples.

Shading the façade

On sunny elevations, external aluminium louvres or fins can be fixed in front of the curtain wall to cut direct sun before it reaches the glass, which helps reduce heat gain and glare.

Cleaning and maintenance

Glass façades need regular cleaning in the UAE because of dust. Seals, drainage paths and opening vents should be checked periodically. We explain the access and maintenance needs for your building at the design stage.

Frequently asked questions

Can you install a curtain wall on a villa?

Yes. Curtain walls are often used on villas for double-height living rooms, stairwells and entrance halls where a large uninterrupted glass area is wanted.

Does a glass façade make the building hot?

Not if the glass and shading are designed for the climate. Double glazing with solar-control coatings, thermal-break frames and external shading greatly reduce heat gain compared with plain glass.

What is the difference between curtain wall and windows?

Windows sit inside openings in a wall. A curtain wall replaces the wall itself on that part of the façade and runs past the floor slabs, giving larger continuous glass areas.

Do you work with architects and main contractors?

Yes. On larger projects we work from the architect’s drawings and coordinate with the consultant and main contractor.

Do you work in Sharjah?

Yes. We work across Dubai and Sharjah, and in other emirates by arrangement.

Request a free site visit

Send us drawings or photos of your project, and we will arrange a visit or a drawing review.

WhatsApp us   Call +971 56 858 0085   Send a message

Related: Facades & ACP cladding · Aluminium windows & doors · Shopfronts · Skylights & glass roofs

اقرأ هذه الصفحة بالعربية